AFTERMARKET GOLFCARTPARTS

Golf Cart Windshield for Club Car DS 1982-2000.5, 4MM Tinted Folding Windshield

Golf Cart Windshield for Club Car DS 1982-2000.5, 4MM Tinted Folding Windshield

Spread The Love

Description

Golf Cart LED Headlight Tail Light Kit for EZGO TXT 95-15,12-48V Legal Street- golf cart deluxe Daytime Running LED light kit fits for 1995-2015 EZGO TXT Golf cart- EZGO TXT LED Headlight Tail light kit updated version, that allows you golf cart extend to brake, hazard, Low-beam/High-beam Lamp,horn and turn signal function.there are front turn signals as well as rear turn signals, hazard flasher, head lights and brake lights.- No need voltage reducer then Upgrade LED golf cart light kit work on 16-48V, This LED light kits built-in voltage converter, so you don’t need to buy voltage reducer any more what ever your cart is 36V or 48V.If the model is 12V golf cart, please pull out the plug next to the voltage converter, then combine the 2 black wires and the 2 red wires together, and then connect the power supply, and it will work normally. – Living in a golf cart community and using cart daily to get around, a suitable set of car lights is very necessary for your golf cart ,you will get a great night vision and be safe after your golf cart install bright led golf cart lights.
What you need to know before installingPlease check the product according to the following steps as the first thing after you receive the car light kit. After all parts of the car light work well, then install it on the golf cart:1.After installing the wire, connect the power supply (must be 16-48 voltage
,and make sure the positive and negative poles is correct , )2.Turn on the emergency switch ( the red one), and the turn signal light should flash before and after the test. –to check the control box and the connection line to work well3.Turn off emergency switch and spin the turn signal switch to ON, the headlights and taillights should be on,–to check the head light taillights and the signal switch are all work well .4.The brake lever switch( signal switch) turns to the left and right, the corresponding left and right signal lights flash—to check controller and signal switch is work well5.Step on the pedal and the tail light will brighten, release it and go off.—To check the brake pedal

Contact Us
categories