AFTERMARKET GOLFCARTPARTS

Tell you how to replace golf cart driven clutch

Share on facebook
Share on twitter
Share on linkedin
Share on reddit
Share on pinterest
Share on odnoklassniki
Share on tumblr

  1. Access the Driven Clutch:
    • Depending on your golf cart’s design, you may need to remove parts like the seat, engine cover, or access panel to reach the driven clutch.
  2. Remove the Belt:
    • Locate the belt that connects the primary clutch (driver clutch) to the driven clutch. You may need to loosen any tensioning mechanism or remove a cover to access the belt.
    • Carefully slide the belt off the driven clutch pulley.
  3. Remove the Driven Clutch:
    • The driven clutch is typically held in place by bolts or screws. Use your socket wrench set to carefully remove these fasteners.
    • Gently wiggle and pull the driven clutch off its shaft.
  4. Install the New Driven Clutch:
    • Position the new driven clutch on the shaft in the same orientation as the old one.
    • Insert and hand-tighten the mounting bolts/screws.
  5. Reinstall the Belt:
    • Slide the belt onto the driven clutch pulley. Make sure it’s properly seated and aligned.
  6. Tighten the Belt:
    • If your golf cart has an adjustable tensioning mechanism for the belt, follow the manufacturer’s guidelines to adjust the tension properly.
  7. Reassemble:
    • Reattach any parts or panels you removed to access the driven clutch.
  8. Battery Reconnection:
    • Reconnect the golf cart’s battery.

club car golf cart driven clutch
how to remove driven clutch on ezgo golf cart

Contact Us

Latest Post