: Club Car DS fender flares only fits DS 1993 & Up Gas and Electric models. They Will Not work on non-OEM bodies. If you have after-market rocker panels, you may need to modify them to fit. If you have brush guard, these fender flares may not fit your cart.
: These Golf Cart fender flares are Constructed of impact-resistant ABS plastic makes them an excellent option for the outdoorsman. When you take your family out in the woods with you, the back tires could kick up a colossal amount of mud on your rear passengers. You could end up giving yourself a no-charge mud-bath thanks to the aggressive tread upfront. Get a set of DS Fender Flares and eliminate that issue.
: The Fender flares for Club Car Ds golf cart come with 2 x front, 2x rear fender flares. They are marked relative to where it is going to mounted. This can be found on the inside of the fender flares. We also include black self-taping screws and installation instructions in the package.
: They can be installed quickly and easily in minutes. We still recommend getting them warm and pliable before mounting. Drilling is required on golf cart. Please follow our instructions to install these fender flares.
: is confident in our product quality, so we provide a 1-year warranty on our products. Please contact us if you have any questions before or after purchase.

Since 1981 Club Car Golf Carts have positioned their serial numbers just under the glove box on the passenger??s side of the vehicle. The serial number of each vehicle is printed on a bar code decal. The two letters at the beginning of the serial number “A” indicate the vehicle model. The following four digits “B” indicate the model year and production week during which the vehicle was built. The six digits “C” following the hyphen represent the unique sequential number assigned to each vehicle built within a given model year.
On Club Car Golf Carts prior to 1981, you can find the serial number by raising the seat and locating the aluminum, I-beam frame section closest to the batteries on the driver’s side of the car. If the serial number plate has been removed, you can confirm it is a 1975-1980 model if it has two brake pedals and one accelerator pedal.

Test fit fender flare to bodywork to determine best placement. Keep in mind our flares have notches in them to accommodate for the rocker panels and the contour of the body. Holding the fender flare in place, mark locations to be drilled using a marker.For Stainless Steel hardware, Drill first hole using a ” drill bit. Ensure area behind body work is clear.For Self-Tapping Screws, Drill a pilot hole using a 1/8″ drill bit. Ensure area behind body work is clear.Install the first fastener to secure fender flare. Check other marked holes to ensure proper placement before drilling. Once sure of placement, remove fender flare out drill other holes.
Install the mounting hardware and repeat the process on the other three fender flares.
NOTE:
WE OFFER TWO DIFFERENT TYPES OF MOUNTING HARDWARE. PLEASE NOTE THERE ARE DIFFERENCES IN HOW THEY ARE INSTALLED.
Each fender flare is marked relative to where it is to be mounted. This can be found on the inside of the fender flare.